By John Morris · Published September 11, 2026 · Updated · Research-based guidance
Documented details
- Nominal capacity
- 15L
- US model reference
- KZ-D15
- Ultrasonic power / heater
- 360W / 400W on the US manufacturer page
- Tank interior
- 330 × 300 × 150 mm, US page
- Maximum workpiece
- 270 × 220 × 105 mm, manufacturer limit; not basket dimensions
A specific US configuration
The matching VEVOR US page identifies KZ-D15 and lists 360W ultrasonic output, a 400W heater and a 40kHz frequency. Its reported inner tank is 330 by 300 by 150 mm. Another regional KZ-D15 page gives different dimensions and heater power; those values are not substituted here merely because the model family sounds the same.
Match the selected Amazon configuration and supplied rating label before relying on a close-fit measurement. Retail pages can combine a size selector with specifications for the selected variant, so keep a record of the actual unit you are purchasing.
Why the workpiece limit matters
VEVOR gives 270 by 220 by 105 mm as the maximum cleaning workpiece size on the US page. That is distinct from the larger tank cavity. We report it as a manufacturer limit rather than silently calling it an internal basket measurement.
As a planning example, a housing close to the tank width may look promising in a rough sketch but still exceed the stated workpiece width. Compare all three dimensions with the intended orientation, including fittings that protrude. If the assembly needs to be tilted or forced into place, seek confirmation rather than treating a diagonal measurement as permission.
Choose the controls for the job
The documented timer runs from zero to 30 minutes and the temperature is adjustable. Use settings permitted by the equipment manual, solution and item maker; inspecting a clean-looking surface does not establish material compatibility.
Compare this model with VEVOR’s 6L degassing version when load width is the issue. The 15L page publishes a 270 × 220 × 105 mm maximum workpiece envelope, while the 6L profile has tank dimensions but no verified basket interior. Compare those measurements under their correct labels rather than treating both as usable basket space.
Before you choose
- Regional KZ-D15 specifications conflict; this page uses the US source.
- A stated workpiece limit is not a verified basket interior.
- No automatic compatibility claim for electronics, optical coatings or assembled items.
Check usable space in the fit tool · Read cleaning and selection guides
Check on Amazon ↗
