VEVOR 30L Degas and Gentle Ultrasonic Cleaner
VEVOR

VEVOR 30L Degas and Gentle Ultrasonic Cleaner

The distinguishing feature of this 30L VEVOR is its combination of degassing and reduced-power options. These give a user more process choices than a simple timed bath, but they do not make every material suitable for ultrasonic cleaning. Buy the mode set only if it answers a real need in your cleaning routine.

Consider it for compatible larger workshop loads when both the degassing function and selectable ultrasonic power serve your process.

As an Amazon Associate I earn from qualifying purchases. About our affiliate links.

Check on Amazon ↗

Check the exact model, seller and current terms on Amazon.

Compare this model →

By John Morris · Published September 11, 2026 · Updated · Research-based guidance

Documented details

Nominal class
30L
Official US model
TH-SPQXJ-100A
Ultrasonic power
600W
Heater power
1200W; not ultrasonic output
Modes
Degassing and gentle modes, manufacturer advertised
Tank interior
530 × 325 × 200 mm, manufacturer stated

Read the two power figures correctly

The US TH-SPQXJ-100A page distinguishes 600W ultrasonic power from 1200W heating. Its tank interior is listed as 530 × 325 × 200 mm, with 40kHz operation and a zero-to-30-minute timer. These are configuration details; none is a measured cleaning-performance result.

The newer 30L knob-control listing is a separate comparison: it lists a zero-to-90-minute timer and explicitly distinguishes nominal class from working water level. Choose between them by the control sequence and load requirements, keeping each model’s specifications together.

Modes do not replace material checks

The manufacturer advertises degassing for preparing the liquid and a gentle setting for lower-power operation. We do not adopt its percentage improvement claim as a measured result. No independent performance test accompanies this buying note.

Reduced output should not be treated as clearance for a fragile setting, coating or bonded assembly. First establish whether the item maker permits ultrasonic cleaning at all. The useful role of a selectable mode is to adjust an already appropriate process, rather than rescue an unsuitable item from the wrong method.

Plan around the actual basket

The US specification table reports a 530 by 325 by 200 mm tank interior and a zero-to-30-minute timer. Basket clearance is not established in our source record. The tank measurement is shown for comparison, but our fit tool cannot turn it into a confirmed basket fit.

A sensible shortlist starts with the largest routinely cleaned item and the number of parts you want to process separately. Consider whether a smaller bath can handle those tasks without crowding. Choose this larger model when its documented configuration and additional controls justify the space, solution volume and setup involved. Confirm the current manual and electrical requirements of the ordered unit before use.

Before you choose

Check usable space in the fit tool · Read cleaning and selection guides

Check on Amazon ↗

Similar-capacity alternatives

These models share the same type of cleaning setup and are ordered by the closest advertised capacity. Capacity alone does not prove fit or equivalent performance.

As an Amazon Associate I earn from qualifying purchases. About our affiliate links.

CREWORKS 30L Digital

CREWORKS

CREWORKS 30L Digital

Compare the CREWORKS 30L digital ultrasonic cleaner with the knob model, including capacity, controls and the exact-model measurements to verify before buying.

Investigate this model when a documented large basket is essential and you prefer digital settings over rotary controls.

Check on Amazon ↗

Compare this model →

CREWORKS 30L Knob Controls

CREWORKS

CREWORKS 30L Knob Controls

Consider the CREWORKS 30L 600W knob cleaner for a parts bench, with rotary-control tradeoffs, heating specifications and basket measurements to verify first.

Shortlist it when the job calls for a genuinely large basket and rotary adjustment is the interface you prefer.

Check on Amazon ↗

Compare this model →